日本語 
中文 Feed-up-the-Arm Interlock Stitch MachineVT2500 series
UT-A34 & ST2-A
Air-operated Under Thread Trimmer & Air-operated Top Cover Thread Trimmer for VT Series Interlock Stitch Machine
UT-A34: Automatic Under Thread Trimmer
UT device automatically cuts needle threads and looper threads under the fabric at the end of sewing or in the middle of sewing.
UT-A34 device for VT series is housed inside the cylinder bed to keep a simple appearance. Easy maintenance and short thread tail will help you increase the productivity.
ST2-A: Automatic Top Cover Thread Trimmer
ST device automatically cuts top cover threads right after a UT device cut the needle threads and looper threads.ST devices are used combined with a UT device.
| UT-A34 | UT-A34 / ST2-A | |
|---|---|---|
| Operation | Air-operated | Air-operated |
| Under Thread Trimmer | Yes | Yes |
| Foot Lifter | Yes | Yes |
| Wiper | Yes | |
| Top Cover Thread Trimmer | Yes | |
| Waste Collection | ||
| Remarks | Wiper & foot lifer works independently | No wipers |
FL1
Air-operated Pressor Foot Lifter
Air-operated Pressor Foot Lifter for VT series.
ACCU-10
Computerized Accurate Tape Tension Controller
Be accurate, always. Computerized Accurate Tape Tension Controller Compatible with Any Machines.
As the device always adjust tape feeding amount to be right tension on tape while measuring actual tension, accurate finish can be obtained.
Simple operation to set tensions, models and etc with the intuitive operable control panel. The indicator informs current process and approach of process changing point without forcing operators to turn their head.The device has also capability to control various additional devices like tape cutter.
ACCU-10 can be set on table in many ways to feed tape from top, bottom and side of machine. It can be used along with any kinds of sewing machine used for tape attaching operation.
AEF-31 & AEF-32
Compact Type Clamp System for Automatic Tape Feeder
This device supplies tape into the machine without any tension. Tape feeding amount is adjustable to meet various kinds of tape with different elasticity. Clamp system is introduced for easy installation on machine table and relocation to other machines.
Compact Type Clamp System for Automatic Tape Feeder for overlock machines for shoulder joining operations and interlock stitch machines for lace / elastic attachment operations.
This device supplies tape into the machine without any tension.
Compact design. Clamp system is introduced for easy installation on machine table and relocation to other machines. Height and position of the device can easily be adjusted so this device can be fitted to any machines.
Tape feeding amount is adjustable to meet various kinds of tape with different elasticity.
AEF-31
Compact Type Clamp System Automatic Tape Feeder
Tape-feeding amount can be adjusted freely by thumbscrew. Max. tape width: 100 mm
Designed for supplying tapes from the top of the machine.
Applicable for: every machines for tape / lace attaching operations
AEF-32
Compact Type Clamp System Automatic Tape Feeder for Piping Tapes
Tape-feeding amount can be adjusted freely by thumbscrew. Max. tape width: 100 mm
Designed for supplying tapes from the right side of the machine.
Applicable for: every machines for tape / lace attaching operations
TL1 & TL2
Compact Spot Light
This heat-free, long life compact spot light lightens the needle dropping point and allows operators to see sewing area clearly. It is convenient when sewing, threading, changing needles and adjusting loopers and so on.
TL1: Fixed type Compact Spot Light
Suitable for threading
TL2: Flexible type Compact Spot Light
Also convenient for threading and adjustments)
Applicable for: All machines
TL devices is compatible 100V to 240V.