Super High Speed Multi Module Cylinder Bed Interlock Stitch Machine with Active Thread ControlVG-8 series

Basic model of VG series.

Applicable for general sewing operations.  Needle bar stroke is set 31 mm for sewing light to medium weight fabric.

VG2700-8F with the dedicated feed layout and the needle plate to hemming operation for light weight fabrics.

VG2700-8F with puller mechanism.

Same as VG2700-8F except that needle bar storke is set to 33 mm for medium to heavy fabric.

VG2730-8F with puller mechanism

Exclusive model for hemming operation equipped with sewing parts designed for:

• Relaxed and streatchable stitch formation
• Sure feeding performance
• Unique layout of feed dogs for flat finish of edge of hem to obtain neat finish of hem

Exclusive model for hemming operation equipped with sewing parts designed for:

• Relaxed and streatchable stitch formation
• Sure feeding performance
• Unique layout of feed dogs for flat finish of edge of hem to obtain neat finish of hem

Equipped with fabric trimmer to trim folded edge of hem for uniform finish.

Downsized trimmer and newly designed sewing parts ensure smooth operation and "stitch on stitch" overlapping.

Also, trimming margin can be held down and waste of material is minimized.

Trimming position is easily adjustable while keeping engagement of knives and is also applicable for different hemming styles with a little downtime.

Movement of fabric trimmer can be cancelled easily when trimming is not necessary.

No re-adjustment required when using the trimmer again.

Also, whole trimming mechanism can be removed and the machine can be converted into normal cylinder bed machine by exchanging covers and sewing parts.

High efficiency for your equipment investment is obtained.

A submodel for covering operation, the short cylinder bed enables easy and smooth handling.

A wide variety of sewing parts and fabric guides are avaialble for various seam styles.

VG2713-8F with the puller mechanism

A subclass of VG series with unique cylinder bed, which ensures further smooth handling of covering operation on small circular portion such as neckline of sweat shirt and etc.

Easier access to internal mechanism than conventional models for easier maintenance.

VG2790-8F with higher differential feed ratio.

A submodel for attaching elastic tape (lace) on waist and leg openings of ladies' panties and etc.  Equipped with right hand fabric trimmer to trim the edge of body fabric for neat finish.

Electronically controlled stepping motor driven metering device gives various and precise tension to elastic tape for good quality finish and uniform finishing size (26 x 20 different tensions can be set).  The metering device can be swung out for easy threading.

A submodel for attaching pre-closed woven elastic band on waist of men's brief and etc.  Equipped with right hand fabric trimmer totrim the edge of body fabric for neat finish.  

Exclusive sewing parts and guides are introduced for smooth insertion and sure overlapping of elastic band and body fabric.

Fabric trimmer can be dropped for no trimming even during sewing.

Following submodels are also available:

• VG2735: Without puller
• VG2735E: Without puller & tension rollers

A submodel for attaching collarette tape.  Standard tape folder, which is used with flat bed binding machine, can be used for ideal finish.

Note: Folder is not included in the machine.

Equipped with exclusive sewing parts, puller mechanism, and flat rubber rollers to obtain flat and neat finish.

A submodel for top stitching on elastic tape attached by overlock.

Short Cylinder Bed enables easy and smooth handling without obstructions of gusset on bikini brief and etc.

Combination of exclusive sewing parts and puller mechanism ensures positive feeding performance.

A submodel of VG2790 class for top stitching on elastic tape attached by overlock.

Unique Cylinder Bed allows operator to control fabric at colose position to needle dropping point and ensures smooth flow of fabric without obstruction.

Another submodel of VG2790 class for top stitching on elastic tape attached by overlock.

Unique Cylinder Bed allows operator to control fabric at close position to needle dropping point and ensures smooth flow of position to needle dropping point and ensures smooth flow of fabric without obstructions.  

Besides, the model is equippped with sewing parts on VG2740P.  Also, applicable for hemming operation.

VG2792-8F with the puller mechanism.

The 4 needle interlock stitch is available on the VG.

Basic features, especially the new thread take-up mechanism for the VG series and exclusive sewing parts, achieve a relaxed stitch formation with good durability, but without the retainer needle.  

Conversion from / into the standard 2, 3 needle interlock stitch machine requires no complex adjustment of the internal mechanism.  Simply exchange several parts and the thread tension assembly.  

There is no need to pay for an exclusive model with limited use.  Use the VG for all seasons.

VG2760-8F with a puller mechanism.

A submodel for top stitching on "display tape", tape consealing overlock seam on neckline of T-shirts.

Exclusively designed sewing parts and WF8, walking pressor foot with guiding groove for tape, ensures a neat finish without puckering.

Also, the machine is easily converted from/into standard interlock stitch machine by exchanging sewing parts and the looper thread take-up cam.

VG2708-8-WF8 without the walking pressor foot.