Sewing Machine Devices

For further uniform quality with less sewing skill, this deskilling device allows you high productivity and uniform finish while minimizing the operators' fatigue which causes uneven quality. Also, learning curve of new operators can be improved.

EL1 is a See Through Light for Hemming operation which lightens the sewn fabric from the bottom. It helps operators so that they can easily see the edge of folded fabrics and make sure the edge is in the correct position.

CH plus TC devices are Blind Hemming Guide with Sideseam Sensor with Quick Change Thread Tension Controller for Blindstitch Hemming ⇆ General seaming which prevent misalignments during blind stitch hemming operations.

Yamato RS 25 is an air-operated labor saving device for attaching rib-knitted bands. Yamato RS25 enables you to achieve higher productivity and higher quality pucker-free finish thanks to deskilling the collar / the waistband attaching operation.

Be accurate, always. ACCU-10 is a Computerized Accurate Tape Tension Controller. As the device always adjust tape feeding amount to be right tension on tape while measuring actual tension, accurate finish can be obtained.

This device supplies tape into the machine without any tension. Tape feeding amount is adjustable to meet various kinds of tape with different elasticity. Clamp system is introduced for easy installation on machine table and relocation to other machines.

TG device is the Top Gathering Controller for Beautiful Gathering without Slow-down of Sewing Speed in combination with top and bottom feed overlock / safety stitch machines. Intermittent gathering operations can be made with TG device in combination with SG device, the Intermittent Gathering Controller.

WF devices are walking pressor feet designed to move back and forth in cooperation with feed dogs with minimum pressure, and help improving feeding performance. Those are useful in hemming, covering, top stitching operation preventing twists, ply shifts or tracks of foot on dark colored fabric.

FF device is a Floating Pressor Foot for overlock machines designed to move back and forth in co-operation with minimum pressure and help positive feeding performance. Floating Foot prevents twisting and slippage during sewing on a wide range for various kind and weight of materials.

RF device is the auxiliary rear feeding device for feed-off-the-arm type flatseamers. It feeds thread-chains and fabrics behind the pressor foot to make positive feed performance and minimize the risk of clogging.

UTQ device forms an anchor by needle thread at the end of 2/3 needle coverstitch and 401 stitch, in order to avoid seam unravelling from the end. "Q-finish" enables elimination of tacking operation done by single needle lock stitch and bar-tacker.

Clean-finish & Secure back-tack is made while you blink. ABT30 is a Automatic Back-tacker. ABT30 enables real quick back-tack procedure for you to operate like usual overlock with chain cutter only.

Back-tackers suitable for a various kinds of knit wear sewing

TB device is the back tacker for LG series zigzag sewing machines.

Condense Stitch Mechanism makes condensed stitch to prevent unravelling of seam from end.

Thread trimming devices for blind stitch machines. Further, AT/TS2/TF and AT/TS3/TF have anti-unraveling function to prevent seam unraveling of blind stitch.

UTQ device forms an anchor by needle thread at the end of 2/3 needle coverstitch and 401 stitch, in order to avoid seam unravelling from the end. "Q-finish" enables elimination of tacking operation done by single needle lock stitch and bar-tacker.

Thread trimming devices for blind stitch machines. Further, AT/TS2/TF and AT/TS3/TF have anti-unraveling function to prevent seam unraveling of blind stitch.

Thread Pull-off device for CM series blind stitch machines enables high quality finish without wrinkles on soft and delicate fabrics taking advantage of fabric's texture.

MT, PT & MU devices are Automatic Cutter of Thread Chains & Tapes

Controlled by the compressor air, it sucks the thread chain and cuts them and collects the dust.

Saving on labor, thread and electricity, sewing naturally and smoothly. Under Thread Trimmer & Top Cover Thread Trimmer for Interlock Stitch Machines

Just press the knee switch to save labor and material. Semi-automatic solenoid type tape cutter for better productivity

UT-A50T is the air-operated under thread trimmer with short cut thread trimming function for VC2840P, VC2845P and VC3845P multi-needle cylinder bed double chain stitch machines. The epoch thread trimming system performs virtually no thread tail finish.

Air-operated Under-thread Trimmer designed for multi-needle machines, VC2840P, VC2845P and VC3845P

UT-18 & UT-15 are automatic thread trimmers for LG series zigzag sewing machines. UT-18 has the anti-bird's nest function and can prevent bird's nest at the beginning of seaming.

Movable air-operated rear and lower roller tension controllers, for uniform finish of elastic inserting operations.

AS device is an Air-operated Folder Slider.  AS device controls open / close of folder for easy loading of material and smooth overlapping at the end of circular sewing.

Automatic Pressor Foot & Puller Lifter for CM series, FD series, VFK series, AZ series, VT series and MG series

SC18 & SC25 are the self cleaning system for preventing oil stains, easy maintenance and good working environment. This device blows lint inside sewing cylinder and collects (sucks) it thus decreasing downtime for cleaning. Therefore, there is no need worry about stains on fabric caused by oil-stained lint.

SC devices are lint collection pipes which keep clean working environment and minimize downtime.